What are the color mixing processes for automotive repair paint
The color matching of sedan repair paint is based on the "spectral color" manufacturing specification card. The color matching can be found from the color card, or according to the coating sample provided by the user.
The specific steps for car paint care techniques are as follows:
(1) To accurately distinguish colors, first apply colors according to the color palette, accurately distinguish their "hue", "brightness", and "purity" under standard light source conditions, and confirm the main color, background color, and other necessary quality colors and adjust the "hue", "brightness", and "purity" of the primary color materials based on this.
(2) The correct selection of color materials requires the use of sharp shapes, types, diluents, and auxiliary materials of color coatings, and the selection of functional and economical primary color materials for use.
(3) After adjusting the sample first, many adjustments should be made. In the absence of color matching equipment, it is even more important to adjust the sample first to obtain the accuracy of the color matching ratio, laying a foundation for reducing waste in many adjustments.
(4) The modulation steps and methods should strictly follow the principle of prioritizing the main and then the secondary, from shallow to deep, and should be thoroughly stirred and evenly dissolved during mixing.
(5) The participation of auxiliary materials should be strictly proportional to the appropriate types, and timely and appropriate amounts should be mixed evenly. It should be pointed out that the color mixing paint is wet while the sample color is solid, so the color after the paint color should be slightly lighter than the sample structure, not similar, nor too deep. It should be slightly lighter than the original color, so that after the paint dries, it will be the same board color together, otherwise it will be too dark.
Article source: Automotive repair paint http://www.jinliangxincai.com
-
08-25
Common problems with automotive repair paint
Why are the orange lines on the surface of the varnish so heavy after each spray? Why on earth? How can we prevent a decrease?Answer: The thinness of the varnish, the amount of paint produced by the s
-
06-05
The car repair paint manufacturer told you about the problem with water-based coatings
1. How long does it take for a skilled paint coating technician to master the operation of water paint?Generally, practice and understanding with less than half a sound can be mastered, and proficienc
-
05-31
Qingyuan Automobile Repair Paint Company tells you the steps for painting
Automotive Painting Process(1) Rust prevention and internal painting of the vehicle body: Depending on the condition of the vehicle body, it will be completed by a sheet metal worker.(2) Polishing and
-
05-12
Why does car repair paint lack luster?
If there is a lack of gloss on the surface of the originally flat and smooth car paint surface, especially during the process of car paint care, it can be observed under a microscope that the surface