What are the important things to pay attention to when repainting a car
1. Touching up the paint is not a trivial matter, it is necessary to go to a professional large automobile repair shop or specialized repair shop.
2. Many colors of the repair paint are made before the correction.
During the entire process of driving the car, the paint will gradually fade, and the human eye cannot separate. However, from different perspectives in outdoor sunlight, the level of fading is slightly different. To try to match the original color as much as possible, only the current color should be used.
Also, in order to avoid color deviation as much as possible, even if it is necessary to repaint a small area, the factory will spray all the parts again.
Assuming that there is a need to patch an area on the car door, then take the anti friction strip as the boundary and spray the upper or lower half of the car door. That way, assuming there is a slight loss of color, it will not be easy to see.
Suitable for temperature
Although people mentioned that the baking temperature of repair paint is relatively low, it is not necessarily necessary to bake or use other methods to replace it. When you realized that there was no professional paint drying room in the repair shop, I should have considered leaving, and what you said didn't work for the better.
Beware of being deceived
When the repair shop tells him they are using the original paint, you can be careful at that time. All areas, even those included in the original, and after the car is installed, repainting is not simple. What kind of "original paint"! The reason is simple: after spraying the paint, bake it at 150 degrees Celsius.
And how many components in the finished car can withstand a temperature of 150 degrees Celsius? Do you mean to dismantle the car again, leaving only the car shell? Professional repair paint is used for all paint repairs.
Pay attention to the natural environment
We all know that large and medium-sized car factories produce assembly lines, and spraying is carried out in purification workshops. Although many domestic cars may not necessarily do that, it may not be necessary.
When you see that the garage is so dirty and dusty. I suggest you change the area. Otherwise, even if it was beautiful to go out at that time, for a period of time, the car paint would blister and molt all over the place.
Article source: Qingyuan Automotive Repair Paint http://www.jinliangxincai.com/
-
08-25
Common problems with automotive repair paint
Why are the orange lines on the surface of the varnish so heavy after each spray? Why on earth? How can we prevent a decrease?Answer: The thinness of the varnish, the amount of paint produced by the s
-
06-05
The car repair paint manufacturer told you about the problem with water-based coatings
1. How long does it take for a skilled paint coating technician to master the operation of water paint?Generally, practice and understanding with less than half a sound can be mastered, and proficienc
-
05-31
Qingyuan Automobile Repair Paint Company tells you the steps for painting
Automotive Painting Process(1) Rust prevention and internal painting of the vehicle body: Depending on the condition of the vehicle body, it will be completed by a sheet metal worker.(2) Polishing and
-
05-12
Why does car repair paint lack luster?
If there is a lack of gloss on the surface of the originally flat and smooth car paint surface, especially during the process of car paint care, it can be observed under a microscope that the surface